Help Categories

Transcranial Random Noise Stimulation generates a random waveform for neuro stimulation.

These are the settings you can alter in tRNS mode.

tRNS – mode settings

Current0.1 to 2.0mAThis is the maximum current used in the session
Duration1-40 minutesThe duration of the neuro stimulation session.
BipolarOFF / ONElectrodes change from anode to cathode
Max Voltage10,15,20,25,30,35,40,45,50,55,60VLimit the maximum voltage – can prevent target current being reached if impedance of electrodes and wave path too high.
ShamOFF / BLIND / ONSham mode current is started but then turned off. Blind sham it can be on or off.
Duration of real current in sham mode0, 10, 20, 30, 40, 50 secondsThe duration that real current is applied before sham mode turns current off
Random currentOFF / ONRandomise the current between 0 and the target current
Random FrequencyOFF / ONRandomise the frequency between two values
Frequency0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9Hz
1, 2, 3, 4, 5, 6, 7, 8, 9 Hz
10, 20, 30, 40, 50, 60, 70, 80, 90 Hz
100, 150, 200, 250, 300 Hz
The wave frequency in cycles per second


This is how to start a transcranial random noise stimulation from the v2 v2 take charge foc.ud v2 tRNS mode v2 sham mode v2 max voltage focus v2 trns duration v2 trns current v2 bipolar trns mode tRNS random frequency v2 tRNS random current v2 tRNS min frequency v2 trns max freuqncy v2 start tRNS v2 trns graphing v2 trns actual current v2 trns live current