tDCS – transcranial direct current stimulation

Transcranial Direct Current Stimulation applies a constant current for neuro stimulation.

These are the settings you can alter in tACS mode.

tDCS – mode settings

Current	0.1 to 2.0mA	This is the maximum current used in the session
Duration	1-40 minutes	The duration of the neuro stimulation session.
Bipolar	OFF / ON	Electrodes change from anode to cathode
Max Voltage	10,15,20,25,30,35,40,45,50,55,60V	Limit the maximum voltage – can prevent target current being reached if impedance of electrodes and energy path too high.
Sham	OFF / BLIND / ON	Sham mode current is started but then turned off. Blind sham it can be on or off.
Duration of real current in sham mode	0, 10, 20, 30, 40, 50 seconds	The duration that real current is applied before sham mode turns current off